Multiple connections

If Moonlight reports multiple connections, check whether the host PC is connected to the home network through both Wi-Fi and Ethernet. The documentation says this can cause NVIDIA GameStream connection problems. Disconnect one connection—preferably Wi-Fi—then try again.

Router configuration

  • 1. If two routers are operating on your network, the documented fix is to switch one into bridge or Access Point mode. The exact procedure depends on the router.
  • 2. If you are sure there is only one router, restart it.
  • 3. If restarting does not resolve the error, the documentation identifies ISP-side carrier-grade NAT as a possible cause.

Carrier-grade NAT

For the carrier-grade NAT error, Moonlight’s documentation says the ISP has not supplied a public IP address that permits hosting services over the internet. It suggests asking the ISP for one; whether it is available and whether there is a charge depend on the ISP.

If the network issue cannot be resolved, the documentation offers the Moonlight Setup Guide’s ZeroTier instructions as an alternative to try: https://github.com/moonlight-stream/moonlight-docs/wiki/Setup-Guide#zerotier

Firewall and VPN checks

The documentation identifies a host firewall blocking communication between the Internet Hosting Tool and the router as another possible cause. Its diagnostic step is to disable the host firewall temporarily to check whether it is responsible—not to leave it disabled as a permanent fix.

If VPN software blocks access to the local network, disable that local-network-blocking feature. Consult the VPN’s documentation for the relevant setting; Moonlight’s documentation identifies this feature as a common cause of streaming connection problems.

Remote sign-in

For signing back into the PC’s console session, the documentation lists Chrome Remote Desktop, TeamViewer, and VNC as GameStream-compatible remote desktop options. This is a documented GameStream procedure, not a compatibility assessment of every version of those applications.

Sleep and hibernation warnings

  • - For a sleep warning, the documentation generally recommends disabling sleep in the host PC’s Power Settings. The monitor power-off option can remain enabled.
  • - For a hibernation warning, it generally recommends disabling hibernation in Advanced Power Options.
Evidence and publication details

Sources & references

Content responsibility: FrameTinker editorial desk. Source authors and software maintainers are credited separately below; this is not a claim of hands-on testing.

Published .

Moonlight: Internet Streaming Errors — official gaming software documentation https://raw.githubusercontent.com/wiki/moonlight-stream/moonlight-docs/Internet-Streaming-Errors.mdRetrieved Nov 8, 2026

Something doesn’t match your setup?

Suggest a correction