This guide covers the official Moonlight troubleshooting checklist for a PC that cannot stream to a client on the same local network. The documented setup uses GameStream in GeForce Experience and includes NVIDIA GPU checks; it is not a general checklist for every host configuration.
Work through the applicable checks in order. Moonlight's documentation says you can stop once the issue is resolved; completing the entire checklist is not required.
Start with setup and network checks
- 1. For the documented GeForce Experience setup, confirm that GameStream is enabled using the official setup guide: https://github.com/moonlight-stream/moonlight-docs/wiki/Setup-Guide
- 2. Restart both the gaming PC and the Moonlight client device.
- 3. If the gaming PC has multiple connections to your home network, leave only the fastest connection active. The documentation identifies Ethernet as the usual choice.
Check the host configuration
- 1. Review the official known application compatibility issues: https://github.com/moonlight-stream/moonlight-docs/wiki/Troubleshooting#known-application-compatibility-issues. The checklist suggests trying removal of listed programs to identify interference.
- 2. Confirm that the primary monitor is connected to the NVIDIA GPU, is powered on, and that you are logged in.
- 3. If the gaming PC uses a VPN for Internet access, the documentation suggests disabling it to check local-network access. It also points to checking whether local-network access is blocked: https://github.com/moonlight-stream/moonlight-docs/wiki/Internet-Streaming-Errors#local-network-access-blocked-error.
Later-stage troubleshooting
The source next proposes disabling the PC's firewall and antivirus and restarting as a diagnostic check. If streaming then works, it directs readers to the firewall-exception instructions in the setup guide: https://github.com/moonlight-stream/moonlight-docs/wiki/Setup-Guide#firewall-setup.
For the documented GeForce Experience configuration, the next steps are to uninstall GeForce Experience, restart, perform a clean installation, and restart again. After that, the checklist calls for running the following command in an administrator Command Prompt and restarting the PC.
netsh winsock resetSpecial cases and further help
- - Windows Server: The checklist says to install qWave and ensure that the Windows Audio service is enabled and running.
- - Previous Microsoft Remote Desktop use: Follow the Remote Desktop instructions in the official known compatibility issues section before trying to stream again.
- - Still unable to stream: Moonlight's documentation directs readers to its Discord server for help from developers and other users: https://moonlight-stream.org/discord.
Sources & references
Content responsibility: FrameTinker editorial desk. Source authors and software maintainers are credited separately below; this is not a claim of hands-on testing.
Published .
Moonlight: Troubleshooting — official gaming software documentation https://raw.githubusercontent.com/wiki/moonlight-stream/moonlight-docs/Troubleshooting.mdRetrieved Nov 8, 2026Something doesn’t match your setup?
Suggest a correction
