This guide summarizes RetroDECK’s Joy-Con setup instructions for Dolphin on Steam Deck. It covers that documented setup, not a universal configuration for standalone Dolphin.

1. Pair and combine the Joy-Cons

  • 1. On Steam Deck, open Steam Button → Settings → Bluetooth and connect the Joy-Cons.
  • 2. Return to Settings and open Controller Settings.
  • 3. Enable Combine Joy-Con Pairs.

2. Disable Steam Input

  • 1. In Game Mode, open Dolphin’s game page.
  • 2. Before selecting Play, open its controller settings.
  • 3. Disable Steam Input for the Joy-Cons.

3. Configure Dolphin and select the device

  • 1. In Dolphin, open the Controllers tab.
  • 2. Select Emulate the Wii’s Bluetooth adapter.
  • 3. Open Configure and save the profile, as directed by the source.
  • 4. In the device list, select SDL/0/Nintendo Switch Joy-Con (L/R).

4. Configure the Nunchuk toggle and motion settings

  • 1. In the first configuration tab, select the “...” button beside the controller icon.
  • 2. Enter a toggle using Button 4 & Button 6 in the box to emulate attaching and detaching the Nunchuk.
  • 3. Open Motion Simulation and clear everything except Point.
  • 4. Open Motion Input and check Enable under Point.
Evidence and publication details

Sources & references

Content responsibility: FrameTinker editorial desk. Source authors and software maintainers are credited separately below; this is not a claim of hands-on testing.

Published .

RetroDECK: wiki emulator guides — dolphin — dolphin joycons — official gaming software documentation https://raw.githubusercontent.com/RetroDECK/Wiki/main/wiki-rtd/docs/wiki_emulator_guides/dolphin/dolphin-joycons.mdRetrieved Nov 14, 2026

Something doesn’t match your setup?

Suggest a correction