The Steam Controller has several operating modes. Some are selected by holding a button combination while turning the controller on or off.

Select the Right slot

  • 1. Start with the controller off.
  • 2. Hold Steam + A + R1 together for 2 seconds.

Valve says this switches the controller to the Steam Controller Wireless protocol using the bonding information stored in the Right slot. This is the controller’s default configuration.

Continue with pairing

After switching to the Right slot, Valve documents pairing to a Steam Machine or Puck. Either connect the controller to the PC with USB, or place it on the Puck while the Puck is connected to the PC. Steam then guides you through pairing.

Select the Left slot

With the controller off, hold Steam + A + L1 together for 2 seconds to select the Left Puck slot.

Backpack mode and startup behavior

Valve lists Steam + L4 + L5 + R4 + R5 held for 5 seconds as the Backpack mode combination. In this mode, the controller only boots when turned on with that combination or connected via USB.

Evidence and publication details

Sources & references

Content responsibility: FrameTinker editorial desk. Source authors and software maintainers are credited separately below; this is not a claim of hands-on testing.

Published .

Reference- Steam Controller Boot Chords/modes — official gaming software documentation https://help.steampowered.com/en/faqs/view/345E-F55E-E96C-E0CFRetrieved Nov 15, 2026

Something doesn’t match your setup?

Suggest a correction